Industrial Platforms and

Raised work Platform


Model WP-400-AC

The Linearizer™, series WP-400, is designed to raise or lower a worker to the optimum working height for maximum productivity with minimum risk of back injury and fatigue. Ergonomically speaking, the optimum working elevation for most jobs is 2" below elbow height. Typical applications might include packing stations, heavy machinery such as drill presses, lathes and saws, individual work cells or work areas where height is a problem. The WP-400 may be used in a clean room environment since the lifting source is an electric linear actuator. An ergonomic anti-fatigue mat is included on the platform. For minimizing cumulative trauma injuries, the Linearizer™ is the obvious choice.

Operation
Operation of the Linearizer™ is as simple as pushing a button. An electric linear actuator is used to raise or lower the platform to the optimum ergonomic level. Unit is operated with a 24V pendent hand held push button control on an 8' cord for AC unit and 6' for DC unit. The actuator power supply may be either 115V A/C or 12V D/C. D/C power unit includes battery with built-in battery charger. The WP-400 includes two rigid casters on the back side to facilitate ease in transporting.

= Approval Drawing = Warranty = Photo Gallery = Testing Certificate

Posi-Crank

The Posi-Crank ergonomic work station is an economical variable height worker positioner. With a simple turn of a crank, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale.

The Posi-Crank incorporates the use of acme threaded rods and a series of gears for simple yet effective height adjustment. A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage. The crank handle may be removed and placed on the handle holder for maximizing the operating space. The deck is constructed of 1/8" steel tread plate for strength and the best traction. Maximum capacity is 500 pounds. Vertical travel range is 3" lowered to 19" raised. The Posi-Crank is constructed of steel to provide for years of service. The unit is painted blue, while the ergonomic anti-fatigue matting is also blue.

Add-A-Level

Raise workers to an optimum ergonomic height. Constructed from a heavy-density polyethylene resin which is 100% recycled. The flow-through grid design permits liquids and small scrap to drain away. Also good for use as storage platform to keep products off wet floors. Add-on units come standard with vertical connectors to allow units to be stacked and locked together. Many different configurations available, contact factory.



Share this article





Related Posts


Aerial work platforms
Aerial work platforms
Telescopic work platforms
Telescopic work platforms

Latest Posts
Toyota Construction equipment
Toyota Construction…
Private donors are giving million for…
Forklifts Manufacturers
Forklifts Manufacturers
Delivering Equipment That Offers You…
Standing Forklift
Standing Forklift
Under-ride is the term given to forklift…
Materials Handling equipment
Materials Handling…
Overhead Material Handling Lecture Material…
Cat Forklift Models
Cat Forklift…
A versatile diesel forklift truck range…
Search
Featured posts
  • Material Handling Equipment Tips
  • Aerial work platforms
  • Telescopic work platforms
  • Work platforms Lift
  • Mobile Elevating work platforms
  • Service Mobile Elevated work platforms
  • AWP Aerial work Platform Harlow Essex
  • Aerial work platforms manufacturers
  • Maintenance Mobile Elevated work platforms
Copyright © 2024 l www.evolutionflt.com. All rights reserved.